DS1211 60W PD Dual USB-C Marine Power Socket IP65 Waterproof Boat Yacht Panel Charger

DS1211 — 60W PD Dual USB-C Charging Point for Wet Decks

Helm consoles, cockpit walls and cabin bulkheads are getting crowded, and most aftermarket chargers simply do not survive salt spray. The DS1211 solves both problems at once: a slim 12-24V DC panel socket that carries one 60W USB-C PD port, one USB-A QC3.0 port and a pair of AC outlets, sealed to IP65 so spray, rain and washdown stay outside the housing. It installs flush into a standard cut-out, needs no grounding wire, and keeps phones, tablets, chartplotters and small galley appliances fed while the boat is underway.

Why Crews Choose This Panel

• Two charging standards on one faceplate — USB-C PD reaches 60W (5-12V) for laptops and tablets, while the USB-A QC3.0 port delivers up to 36W for handsets and accessories.
• IP65 sealing from the front — a gasketed bezel and capped ports shrug off splash, spray and dust without needing a separate cover.
• Dual AC outlets included — run low-draw galley gear and chargers from the same panel instead of stacking adapters.
• Non-grounding circuit design — simplifies wiring on fibreglass hulls and retrofit dashboards.
• 12V and 24V tolerant — the same part number suits small tenders, cruisers and heavy yachts.
• Compact panel-mount body — a shallow rear profile fits behind thin cabin liners.

Technical Data

Where It Fits

Boats and yachts take the brunt of it, but the same panel is a natural upgrade for campervans, motorhomes, fishing rigs, work trucks, ambulances and outdoor kiosks — anywhere a 12-24V feed has to survive weather and constant plugging. Because the front bezel is sealed and the ports are capped, owners can hose the console down after a saltwater run without pulling fuses.

Ordering, Packing and Lead Time

• Packing: neutral white inner box with an outer brown carton as standard; private-label boxes can be arranged when a registered trademark authorisation is supplied.
• Payment: 30% T/T deposit on order, 70% before shipment. Product and packing photos are shared for approval ahead of the balance.
• Shipping terms: EXW, FOB, CFR, CIF and DDU are all workable — tell us the destination port and we will quote accordingly.
• Production window: typically 30-60 days from deposit, depending on quantity and configuration.
• Customisation: OEM builds from your samples or drawings are welcome, including mould and tooling development where needed.
• Samples: available from stock; sample cost and freight are covered by the buyer.

Send us your target quantity, panel cut-out size and preferred port, and we will come back with a quotation and technical drawing within one working day.