Dual LCD Display Marine Switch Panel with 10P 12V + 7P 220V Layout and Aluminum Face Plate Boat Switch Panel

NKK-A0061 10P 12V + 7P 220V Aluminum Switch Panel with Dual LCD Display Screens

The NKK-A0061 places ten 12V DC switch positions and seven 220V AC positions on one aluminium face plate, with two LCD display screens keeping live readings in view. Instead of fitting a DC box and a separate AC box, a boat cabin, RV or workshop vehicle gets the whole distribution layout on a single console: pumps, lights and 12V accessories on the DC side, household appliances on the AC side, and both readouts beside the switches that control them.

NKK-A0061 At a Glance

• Layout: ten switch positions on 12V DC plus seven positions on 220V AC, arranged on one face plate.
• Face plate: aluminium, machined to carry every switch, socket cut-out and display in a single panel.
• Displays: two LCD screens, one reporting the DC side and one reporting the AC side.
• Switching: rocker switches with printed circuit labels, so each circuit is identified without a legend card.
• Wiring: screw terminals on the rear of each switch for straightforward harness connection.
• Customisation: circuit labels, switch ratings and display parameters set to your panel drawing before shipment.

Why Builders Choose a Combined DC and AC Plate

• One cut-out, one control point. Ten DC circuits and seven AC circuits share a single panel outline, so the console is cut once and every control sits within reach of the operator.
• Two readings in one view. The paired LCD screens show DC and AC status side by side, so a sagging battery bank and an AC supply problem are told apart immediately rather than after guessing which system failed.
• Aluminium where plastic fatigues. The face plate holds the switch bodies square under vibration and does not warp, chalk or crack after seasons of sun and salt air.
• Serviceable by design. Each switch is individually mounted and individually terminated, so a failed switch is swapped without scrapping the whole panel.

NKK-A0061 Key Attributes

Where It Fits

• Marine: helm and cabin consoles on sailboats, motor yachts, ribs, fishing boats and pontoons with both battery and shore power.
• RV and camper: van conversions and coaches running 12V lighting, pumps and fans alongside 220V appliances.
• Work vehicles: food trucks, mobile workshops, ambulances and emergency response units with mixed AC and DC loads.
• Off-grid cabins and site offices fed by inverter or generator supply.

Installation Notes

• Write the circuit list first: one line per switch, DC and AC separated, then match it to the printed labels when ordering.
• Route AC and DC harnesses in separate runs and keep the two sides of the plate on their own feeds.
• Leave clearance behind the panel for terminal access, and give the LCD screens a dry, ventilated position.
• Torque and inspect every termination before energising, then confirm both displays read correctly at start-up.

Ordering Information

Minimum order: 1 piece. Price: negotiable, quoted against layout, switch ratings, display configuration and quantity. Packing: neutral box. Lead time: 5-7 working days. Payment: T/T, L/C. Shipments can run on EXW, FOB, CFR, CIF or DDP terms. Send your panel drawing or circuit list and the layout can be confirmed before production.

Buyer Questions

Q: What does the 10P 12V + 7P 220V layout mean?
The panel carries ten switch positions on 12V DC circuits and seven positions on 220V AC circuits, all on one aluminium face plate.

Q: What do the two LCD screens show?
One screen reports the DC side and the other reports the AC side, so supply status is visible at the panel rather than at a remote meter.

Q: Can the circuit labels be customised?
Yes. Labels are printed to your circuit list, and switch ratings are matched to the loads you specify.

Q: Is the face plate metal?
Yes, the plate is aluminium, which keeps the switch bodies square and the surface flat under vibration.

Q: How is the price set?
Price is negotiable, because layout, switch ratings, display configuration and order quantity all change the cost.

Q: What are the delivery and payment terms?
Lead time is 5-7 working days, payment is by T/T or L/C, and shipments run on EXW, FOB, CFR, CIF or DDP terms.